Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 356 of 545 2020-04-15
IPEasy
3.13.1. AT#SGACT - Context Activation
This command enables/disables the PDP context activation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SGACT=<cid>,<stat>[,<userId>[,<pwd>]]
Execution command is used to activate the specified PDP context, followed by binding data
application to the PS network. Also, it is used to deactivate the PDP context and unbind data
application from PS network.
Execution command returns a list of IP addresses for the specified context identifiers in the format:
for IP or IPV6 PDP context: #SGACT: <ipAddr>
for DUAL STACK IPV4V6 PDP context: #SGACT: [<ipAddrV4>],[<ipAddrV6>]
Parameters:
Name
Type
Default
Description
<cid>
integer
-
specifies a particular PDP context definition. To know the range
see +CGDCONT command.
<stat>
integer
0
activates/disactivates the PDP context specified
Values:
0
:
deactivate the context
1
:
activate the context
<userId>
string
-
user identifier, used only if the context requires it
<pwd>
string
-
password, used only if the context requires it
Additional info:
Meaning of the parameters returned by the command.
Name
Type
Default
Description
<ipAddr>
string
-
ip address ipv4 or ipv6
<ipAddrV4>
string
-
ip address ipv4 (if v4 PDP context activated)
<ipAddrV6>
string
-
ip address ipv6 (if v6 PDP context activated)
Context activation/deactivation returns ERROR if there is not any socket associated to it,
see #SCFG.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English