Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 314 of 545 2020-04-15
Power Down
3.9.1. AT#REBOOT - Module Reboot
Immediate module reboot.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#REBOOT
Execution command reboots immediately the unit.
It can be used to reboot the system after a remote update of the script in order to have the new
one running.
If #REBOOT follows an AT command that stores some parameters in NVM, it is
recommended to insert a delay of at least 5 seconds before to issue #REBOOT, to
permit the complete NVM storing.
#REBOOT is an obsolete AT command; please refer to #ENHRST to perform a module
reboot.
AT#REBOOT=?
Test command returns OK result code.
•
Reboot the module
AT#REBOOT
OK
(the module reboots)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English