Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 524 of 545 2020-04-15
GNSS
3.23.1. GNSS Configuration
3.23.1.1. AT$GPSCFG - Set GNSS Configuration Parameters
This command sets the following GNSS parameters: WWAN/GNSS priority, TBF (Time Between Fix) and
constellation. It needs a reboot to make effective the setting.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSCFG=<parameter>,<value>
Parameters:
Name
Type
Default
Description
<parameter>
integer
N/A
selects the configuration parameter to be set
Values:
0
:
set WWAN/GNSS priority
1
:
set TBF
2
:
set constellation
<value>
integer
-
value depends on the first parameter. See Additional info
section.
Additional info:
<parameter>=0, in this case the <value> assumes the meaning of <priority>.
Name
Type
Default
Description
<priority>
integer
1
it selects the priority
Values:
0
:
priority GNSS
1
:
priority WWAN
<parameter>=1, in this case the <value> assumes the meaning of <TBF>.
Name
Type
Default
Description
<TBF>
integer
1
it defines the Time Between Fix
Value:
0÷4294967
:
expressed in seconds
<parameter>=2, in this case the <value> assumes the meaning of <constellation>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English