Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 342 of 545 2020-04-15
3.12.7. AT+CGCONTRDP - PDP Context Read Dynamic Parameters
The execution command returns the relevant information for a PDP Context established by the network.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGCONTRDP[=<cid>]
The execution command returns the relevant information on a PDP Context established by the
network with the context identifier <cid>. If the parameter <cid> is omitted, the information for all
established PDP contexts is returned. The response message has the following format:
+CGCONTRDP:<cid>,<bearerId>,<apn>[,<ip&subnet>[,<gw_addr>[,<DNS_prim>
[,<DNS_sec>[, <P_CSCF_prim>[,<P_CSCF_sec>]]]]]][<CR><LF>
+CGCONTRDP:<cid>,<bearerId>,<apn>[, <ip&subnet_mask>[,<gw_addr>[,<DNS_prim>
[,<DNS_sec>[, <P_CSCF_prim>[,<P_CSCF_sec>]]]]]] [...]]
If the context cannot be found an ERROR response is returned.
The response message parameters are described in the Additional info section.
Parameter:
Name
Type
Default
Description
<cid>
integer
-
identifies a non secondary PDP context definition. The parameter
is local to the TE-MT interface and is used in other PDP context-
related commands.
Additional info:
List of the meaning of the response message parameters.
Name
Type
Default
Description
<berrerId>
integer
-
identifies the bearer, EPS Bearer in EPS and
NSAPI in UMTS/GPRS.
<apn>
string
-
logical name used to select the GGSN or the
external packet data network.
<ip&subnet>
string
-
IP address and subnet mask of the MT. The
string is given as dot-separated numeric (0-
255) parameters on the form. For more
information, see next Additional info section.
<gw_addr>
string
-
Gateway address of the MT. The string is
given as dot-separated numeric (0-255)
parameters.
<DNS_prim>
string
-
IP address of the primary DNS Server.
<DNS_sec>
string
-
IP address of the secondary DNS Server.
<P_CSCF_prim>
string
-
IP address of the primary P-CSCF Server.
<P_CSCF_sec>
string
-
IP address of the secondary P-CSCF Server.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English