Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 343 of 545 2020-04-15
Referring to <ip&subnet> parameter:
the string is given as dot-separated numeric (0-255) parameters. The format is:
for IPv4:
"a1.a2.a3.a4.m1.m2.m3.m4"
for IPv6:
"a1.a2.a3.a4.a5.a6.a7.a8.a9.a10.a11.a12.a13.a14.a15.a16.
m1.m2.m3.m4.m5.m6.m7.m8.m9.m10.m11.m12. m13.m14.m15.m16"
When +CGPIAF is supported, its settings can influence the format of this parameter
returned with the execute form of +CGCONTRDP.
The dynamic part of the PDP context will only exist if established by the network. The test
command returns a list of <cid>s associated with active contexts.
If the MT has dual stack capabilities, two lines of information are returned per <cid>. First
one line with the IPv4 parameters followed by one line with the IPv6 parameters.
AT+CGCONTRDP=?
Return the list of <cid>s associated with active contexts.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English