Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 180 of 545 2020-04-15
3.3.8. AT#SIMPR - SIM Presence Status
The command enables/disables the SIM Presence Status unsolicited indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#SIMPR=[<mode>]
Set command enables/disables the SIM Presence Status unsolicited indication in the ME. This
command reports also the status of the remote SIM, if the SIM Access Profile (SAP) functionality is
supported and has been enabled.
If notification is enabled, the ME informs about every (local and remote) SIM status change through
the following URC:
#SIMPR: <SIM>,<status>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Specifies if notification must be enabled or disabled.
Values:
0
:
notification disabled
1
:
notification enabled
Unsolicited fields:
Name
Type
Description
<SIM>
integer
Reports local or remote SIM
Values:
0
:
local SIM
1
:
remote SIM
<status>
integer
Reports current SIM status
Values:
0
:
SIM not inserted
1
:
SIM inserted
Entering AT#SIMPR= returns OK but has no effect.
AT#SIMPR?
Read command reports whether the unsolicited indication #SIMPR: is currently enabled or not,
along with the local and remote SIM status, in the format:
#SIMPR: <mode>,0,<status><CR><LF>
#SIMPR: <mode>,1,<status>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English