Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 302 of 545 2020-04-15
3.8.7. AT#V24CFG - V24 Output Pins Configuration
This command sets the AT commands serial port interface output pins mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#V24CFG=<pin>,<mode>
Set command sets the AT commands serial port interface output pins mode.
Parameters:
Name
Type
Default
Description
<pin>
integer
0
AT commands serial port interface hardware pin
Values:
0
:
DCD (Data Carrier Detect)
1
:
CTS (Clear To Send)
2
:
RI (Ring Indicator)
3
:
DSR (Data Set Ready)
<mode>
integer
0
AT commands serial port interface hardware pins mode
Values:
0
:
AT commands serial port mode: the V24 pins are controlled by the serial
port device driver
1
:
GPIO mode: the V24 output pins can be managed through the AT#V24
command
Changing V24 pins configuration may affect the cellular module functionality set through
+CFUN.
AT#V24CFG?
Read command returns the current configuration for all the pins (both output and input) in the
format:
#V24CFG: <pin1>,<mode1>[<CR><LF><CR><LF>
#V24CFG: <pin2>,<mode2>[...]]
AT#V24CFG=?
Test command reports supported range of values for parameters <pin>, and <mode>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English