Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 109 of 545 2020-04-15
3.1.5. Call (Voice and Data) Control
3.1.5.1. ATD - Dialup Connection
This command establishes a GPRS communication between the TE and the external PDN.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
Yes
-
2
ATD
The ATD execution command, used for GPRS functionality, assumes the format shown in
Additional info section. It causes the MT to perform whatever actions are necessary to establish
communication between the TE and the external PDN.
Additional info:
ATD*<gprs_sc>[*<addr>][*[<L2P>][*[<cid>]]]]#
Name
Type
Default
Description
<gprs_sc>
integer
N/A
is the GPRS Service Code, which identifies a
request to use the GPRS communication
Value:
99
:
GPRS Service Code
<addr>
string
-
identifies the called party in the address space
applicable to the PDP.
<L2P>
string
-
indicates the layer 2 protocol to be used (see
+CGDATA). For communications software that
does not support arbitrary characters in the dial
string, the following numeric equivalents shall be
used: 1 is equivalent to PPP.
<cid>
integer
-
PDP context definition, see +CGDCONT command

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English