ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 96 of 545 2020-04-15
3.1.4.3. ATV - Response Format
Set command determines the contents of the header and trailer transmitted with result codes and information
responses. It also determines if result codes are transmitted in a numeric form or an alphanumeric form
(according to [1]).
[1] ITU-T Recommendation V.25 ter
format of information responses and result codes. See Additional
info section.
limited headers and trailers and numeric format of result codes
full headers and trailers and verbose format of result codes
<CR><LF>
<verboseCode><CR><LF>
the <text> portion of information responses is not affected by this setting.
if parameter is omitted, the command has the same behavior of ATV0