ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 250 of 545 2020-04-15
3.5.19. AT#SMSMODE - SMS Commands Operation Mode
SMS Commands Operation Mode.
AT#SMSMODE=<mode>
Set command enables/disables the check for presence of SMS Service Centre Address (SCA) in
the Fixed Dialing Number (FDN) phonebook.
Parameter:
Enables/disables the check for presence of SCA in
FDN phonebook.
Disables the check for presence of SCA in FDN phonebook.
Enables the check for presence of SMS SCA in the FDN phonebook when
FDN are enabled. If the SMS SCA is not present a SMS cannot be sent.
AT#SMSMODE?
Read command reports whether the check of SMS SCA in FDN phonebook is enabled or not, in the
format:
#SMSMODE: <mode>
AT#SMSMODE=?
Test command reports the range of <mode> parameter values.