Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 459 of 545 2020-04-15
SSL
3.17.1. AT#SSLCFG - Configure General Parameters of a SSL Socket
This command configures SSL connection parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SSLCFG=<SSId>,<cid>,<pktSz>,<maxTo>,<defTo>,<txTo>[,<skipHostMismatch>[,<SSLSRin
gMode>[,<unused3>[,<equalizeTX>]]]]
Set command allows configuring SSL connection parameters.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now SSL block manages only one socket
<cid>
integer
-
PDP context identifier, see +CGDCONT
command.
<pktSz>
integer
0
packet size to be used by the SSL/TCP/IP stack
for data sending
Values:
0
:
select automatically default value (300)
1÷1500
:
number of bytes
<maxTo>
integer
90
exchange timeout or socket inactivity timeout. In
online mode, if there is no data exchange within
this timeout period, the connection is closed.
Values:
0
:
no timeout
1÷65535
:
timeout in seconds
<defTo>
integer
100
timeout that will be used by default whenever the
corresponding parameter of each command is
not set.
Value:
10÷5000
:
timeout in tenth of seconds
<txTo>
integer
50
data sending timeout. In online mode, after this
period data are sent also if they're less than max
packet size.
Values:
0
:
no timeout
1÷255
:
timeout value in hundreds of milliseconds
<skipHostMismatch>
integer
1
enables/disables Host Mismatch alert

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English