Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 85 of 545 2020-04-15
3.1.3.4. ATS3 - Command Line Termination Character
The command manages the character configured as command line terminator.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS3=[<char>]
Set command sets the value of the character either recognized by the device as command line
terminator and generated by the device as part of the header, trailer, and terminator for result codes
and information text, along with S4 parameter.
Parameter:
Name
Type
Default
Description
<char>
integer
13
command line termination character (decimal ASCII)
Value:
0÷127
:
command line termination character
The "previous" value of S3 is used to determine the command line termination character
for entering the command line containing the S3 setting command. However, the result
code issued shall use the "new" value of S3 (as set during the processing of the
command line)
ATS3?
Read command returns the current value of S3 parameter.
The format of the numbers in output is always 3 digits, left-filled with 0s

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English