Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 95 of 545 2020-04-15
3.1.4.2. ATQ - Quiet Result Codes
This command allows to enable or disable the result code.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATQ[<n>]
Set command enables or disables the result codes.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables result codes
Values:
0
:
enables result codes
1
:
disables result codes. The commands entered after ATQ1 do not return the
result code.
2
:
disables result codes (only for backward compatibility). The commands
entered after ATQ2 do not return the result code.
If parameter is omitted, the command has the same behavior of ATQ0.
After issuing ATQ0 the OK result code is returned
AT+CGACT=?
+CGACT: (0-1)
OK
After issuing ATQ1 or ATQ2 the OK result code is not returned.
AT+CGACT=?
+CGACT: (0-1)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English