Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 414 of 545 2020-04-15
3.13.33. AT#NTP - Calculate and Update Date and Time with NTP
The command handles the date and time update using NTP protocol.
[1] Standard RFC2030
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
10 s
2
AT#NTP=<NTPAddr>,<NTPPort>,<updModClock>,<timeout>[,<timeZone>]
Execution command permits to calculate and update date and time through NTP protocol sending a
request to a NTP server, see standard [1]. The command returns an intermediate response having
the following format:
#NTP: <time>
The <time> parameter is described in Additional info section.
Parameters:
Name
Type
Default
Description
<NTPAddr>
string
-
address of the NTP server.
This parameter can be either:
• any valid IP address in the format:
"xxx.xxx.xxx.xxx" or
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx"
• any host name to be solved with a DNS query
<NTPPort>
integer
N/A
NTP server port to contact
Value:
1÷65535
:
port
<updModClock>
integer
N/A
update mode
Values:
0
:
no update module clock
1
:
update module clock
<timeout>
integer
N/A
waiting timeout for server response in seconds
Value:
1÷10
:
waiting timeout for server response in seconds
<timeZone>
string
0
Time Zone: indicates the difference, expressed in
quarter of an hour, between the local time and GMT.
Value:
-47÷48
:
Time Zone
Additional info:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English