Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 63 of 545 2020-04-15
3.1.2.33. AT+CMEE - Report Mobile Equipment Error
The command enables the use of result code.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CMEE=[<n>]
Set command disables/enables the use of result code +CME ERROR: <err> as an indication of an
error relating to the +Cxxx command issued. When enabled, device related errors cause the +CME
ERROR: <err> final result code instead of the default ERROR final result code. ERROR is returned
normally when the error message is related to syntax, invalid parameters or DTE functionality.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables +CME ERROR: <err> result code and selects
the format
Values:
0
:
disable
1
:
enable and use numeric<err> values
2
:
enable and use verbose <err> values
The detailed description of <err> is available in section "ME Error Result Code - +CME
ERROR: <err>".
+CMEE has no effect on the final result code +CMS.
AT+CMEE?
Read command returns the current value of parameter <n> in the format:
+CMEE: <n>
AT+CMEE=?
Test command returns the supported values of parameter <n>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English