Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 124 of 545 2020-04-15
3.2.8. AT+CPLS - Selection of Preferred PLMN List
The command is used to select a list of preferred PLMNs in the SIM/USIM card.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CPLS=<list>
Set command select one PLMN selector with Access Technology list in the SIM card or active
application in the UICC (GSM or USIM), that is used by +CPOL command.
Parameter:
Name
Type
Default
Description
<list>
integer
0
PLMNs list
selector
Values:
0
:
User controlled PLMN selector with Access Technology EFPLMNwAcT, if not
found in the SIM/UICC then PLMN preferred list EFPLMNsel (this file is only
available in SIM card or GSM application selected in UICC)
1
:
Operator controlled PLMN selector with Access Technology EFOPLMNwAcT
2
:
HPLMN selector with Access Technology EFHPLMNwAcT
The value set by command is directly stored in NVM and doesn't depend on the specific
CMUX instance.
AT+CPLS?
Read command returns the selected PLMN selector <list> from the SIM/USIM.
AT+CPLS=?
Test command returns the whole index range supported <list>s by the SIM/USIM.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English