Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 71 of 545 2020-04-15
3.1.2.39. AT#PORTCFG - Connect Physical Ports to Service Access Points
This command allows to connect Service Access Points (software anchorage points) to the external physical
ports.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PORTCFG=<Variant>
Set command allows to connect Service Access Points to the external physical ports giving a great
flexibility. Examples of Service Access Points: AT Parser Instance #1, #2, #3, etc..
Parameter:
Name
Type
Default
Description
<Variant>
integer
0
set port configuration. A short description, for each <Variant>
value, is reported in test command section. The range
depends on the product.
Value:
0÷max
:
see test command section
To enable the set port configuration, the module must be rebooted.
AT#PORTCFG?
Read command returns the requested and the active port configuration in the format:
#PORTCFG: <requested>,<active>
Additional info:
Parameters returned by the read command, in format:
#PORTCFG: <requested>,<active>
Name
Type
Default
Description
<requested>
integer
-
value showing the requested configuration that will
be activated on the next power ON.
<active>
integer
-
value showing the actual configuration.
AT#PORTCFG=?
Test command returns a brief description of the supported ports arrangement solutions.
For each <Variant> are reported, on one row, the logical connections between a physical port
(USIF0, USB0, etc.) and a Service Access Point (AT#1, AT#2, etc.). Each row reports the logical

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English