Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 282 of 545 2020-04-15
3.7.7. AT#NITZ - Network Identity and Time Zone
This command handles Network Identity and Time Zone.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#NITZ=[<val>[,<mode>]]
Set command enables/disables the automatic date/time updating and the Full Network Name
applying. It enables also the #NITZ URC in the format:
#NITZ: <datetime>
and permits to change its format.
Parameters:
Name
Type
Default
Description
<val>
integer
7
identifies the functionalities to enable.
The <val> parameter is a sum of integer values, where every
value corresponds to a functionality:
• 1 - enables automatic date/time updating
• 2 - enables Full Network Name applying
• 4 - sets the #NITZ URC 'extended' format (see
<datetime> below)
• 8 - sets the #NITZ URC 'extended' format with Daylight
Saving Time (DST) support (see <datetime> below)
Values:
0
:
disables every functionality
1÷15
:
sum of integer values
<mode>
integer
0
enables/disables the #NITZ URC
Values:
0
:
disables the URC
1
:
enables the URC
Unsolicited field:
Name
Type
Description
<datetime>
string
string format depends on parameter <val>
• "yy/MM/dd,hh:mm:ss" - 'basic' format, if <val> is in (0..3)
• "yy/MM/dd,hh:mm:ss±zz" - 'extended' format, if <val> is in
(4..7)
• "yy/MM/dd,hh:mm:ss±zz,d" - 'extended' format with DST
support, if <val> is in (8..15)
For the meaning of the <datetime> subfields, please check +CCLK
and #CCLK commands

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English