Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 296 of 545 2020-04-15
3.8.3. AT#ALARMPIN - Alarm Pin Configuration
This command allows to configure the ALARM Pin.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ALARMPIN=<pin>
Set command allows to set a GPIO pin as ALARM pin.
Configuring a GPIO pin as ALARM pin is equivalent to setting it up with the ALT2 alternate
function. Therefore, a GPIO pin can be configured as ALARM pin also through the #GPIO
command. To have information on GPIO pins refer to document [1].
Parameter:
Name
Type
Default
Description
<pin>
integer
0
GPIO pin number.
Max is the number of GPIO pins provided by the module. For
information on the available GPIO pins use the test command.
Values:
0
:
no ALARM pin set
1÷Max
:
GPIO pin number
AT#ALARMPIN?
Read command returns the current value of the parameter <pin> in the format:
#ALARMPIN: <pin>
AT#ALARMPIN=?
Test command returns the supported values of parameter <pin>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English