Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 127 of 545 2020-04-15
3.2.10. AT#SERVINFO - Serving Cell Information
This command reports information about the serving cell.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SERVINFO
Execution command reports information about serving cell. The information and the format of the
returned message depends on the network type.
GSM network
#SERVINFO:<BARFCN>,<dBM>,[<NetNameAsc>],<NetCode>,<BSIC>,<LAC>,<TA>,<GPRS>[,[<P
BARFCN>],[<NOM>],<RAC>,[PAT]]
LTE network
#SERVINFO:<EARFCN>,<dBM>,[<NetNameAsc>],<NetCode>,<PhysicalCellId>,<TAC>,<DRX>,<S
D>,<RSRP>
The parameters are described in the Additional info sections.
Additional info:
Parameters meaning.
Name
Type
Default
Description
<dBM>
integer
-
received signal strength in dBm.
<NetNameAsc>
string
-
operator name, quoted string or "" if network name
is unknown.
<NetCode>
hex
-
country code and operator code.
<LAC>
integer
-
Localization Area Code
<BSIC>
string
-
Base Station Identification Code
<TA>
integer
-
Time Advance: it is available only if a GSM or
GPRS is running.
<GPRS>
integer
0
GPRS supported in the cell
Values:
0
:
not supported
1
:
supported
<BARFCN>
integer
-
BCCH ARFCN of the serving cell
Parameters meaning.
Name
Type
Default
Description
<NOM>
string
N/A
Network Operator Mode.
Values:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English