Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 115 of 545 2020-04-15
3.2.3. AT+CREG - Network Registration Status
The command enables/disables the network registration unsolicited result code (URC) and selects its
presentation format.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CREG=[<mode>]
Set command enables/disables the network registration unsolicited result code and selects one of
the two available formats:
short format: +CREG: <stat>
long format: +CREG: <stat>[,<lac>,<ci>[,<AcT>]]
The parameter meanings are shown in Unsolicited code value section.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables the network registration unsolicited result code
and selects one of the two formats: shot or long format.
• URC short format is displayed every time there is a
change in the network registration status
• URC long format is displayed every time there is a
change of the network cell
Values:
0
:
disable the network registration unsolicited result code
1
:
enable the network registration unsolicited result code, and selects the
short format
2
:
enable the network registration unsolicited result code, and selects the long
format (includes the network cell identification data)
Unsolicited fields:
Name
Type
Description
<stat>
integer
network registration status of the module
Values:
0
:
not registered, terminal is not currently searching a new operator
to register to
1
:
registered, home network
2
:
not registered, but terminal is currently searching a new operator
to register to
3
:
registration denied
4
:
unknown
5
:
registered, roaming

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English