Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 135 of 545 2020-04-15
3.2.16. AT#SNUM - Subscriber Number
This set command writes the MSISDN information related to the subscriber (own number) in the EFmsisdn SIM
file.
3GPP TS 51.011
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SNUM=<index>[,<number>[,<alpha>]]
Parameters:
Name
Type
Default
Description
<index>
integer
-
the number of the record in the EFmsisdn file in SIM where
the number must be stored; its range goes from 1 to a
maximum value that varies from SIM to SIM. If only <index>
value is given, then the EFmsisdn record in location <index>
is deleted.
<number>
string
-
string containing the phone number
<alpha>
string
-
alphanumeric string associated to <number>; its maximum
length varies from SIM to SIM. Default value is empty string
(""), otherwise the used character set should be the one
selected with +CSCS. The string could be written between
quotes; the number of characters depends on the SIM. If
empty string is given (""), the corresponding <alpha> will be
an empty string.
The command returns ERROR if EFmsisdn file is not present in the SIM, or if MSISDN
service is not allocated and activated in the SIM Service Table, see 3GPP TS 51.011.
AT#SNUM=?
Test command returns the OK result code

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English