Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 52 of 545 2020-04-15
3.1.2.25. AT+CPAS - Phone Activity Status
Execution command reports the device status in the form shown in Additional info section.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CPAS
Additional info:
Message format returned by the execution command:
+CPAS: <pas>
Name
Type
Default
Description
<pas>
integer
0
phone activity status.
Values:
0
:
ready (device allows commands from TA/TE)
3
:
ringing (device is ready for commands from TA/TE, but the ringer
is active)
4
:
call in progress (device is ready for commands from TA/TE, but a
call is in progress)
AT+CPAS=?
Test command reports the supported range of values for <pas>.
Although +CPAS is an execution command, 3GPP TS 27.007 requires the Test
command to be defined.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English