ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 156 of 545 2020-04-15
3.2.28. AT+CEDRXRDP - eDRX Read Dynamic Parameters
This command returns a message related to Extended Discontinuous Reception (eDRX).
3GPP TS 27.007
3GPP TS 24.008
AT+CEDRXRDP
Execution command returns the following message if eDRX is used for the cell that the MS is
currently registered to, in the format:
+CEDRXP:<AcTtype>[,<Req_eDRX>[,<NW_prov_eDRX>[,<PagTimeWindow>]]]
If the cell that the MS is currently registered to is not using eDRX, <AcTtype>=0 is returned.
Additional info:
Here is the list of the meanings of the parameter returned by the +CEDRXRDP
command.
type of access technology.
access technology is not using eDRX
AT+CEDRXRDP=?
Test command returns OK result code.