ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 491 of 545 2020-04-15
3.20.2. OMA-DM
3.20.2.1. AT#HOSTODIS - Host ODIS Parameters Management
The command manages the Host Odis parameters related to AT&T OMA-DM Client.
[1] <CDR-DVM-4532> of AT&T, revision 16.3
AT#HOSTODIS=<Param>,<Action>[,<Value>[,<Instance>]]
The set command allows the end-user to handle the Host Odis parameters for AT&T OMADM client
Parameters:
selects the specific item on which work.
Host Software application version
selects the action to be performed on the item selected by
<Param>
contains a string, between double quotes, with data to be set.
Maximum string length is 64 characters.
It is valid only if <Action> = 0 ("SET" action)
Host Manufacturer, Host Model and Host Software application version do not change
after an OTA firmware upgrade
"GET" action is not allowed on Host Device Unique ID.
Default values, according to specification [1], are:
• HMAN1 (for Host Manufacturer)
• HMOD1 (for Host Model)