Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 59 of 545 2020-04-15
3.1.2.30. AT#MWI - Message Waiting Indication
This command enables/disables the presentation of the Message Waiting Indicator (MWI) URC.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#MWI=[<enable>]
Set command enables/disables the presentation of the Message Waiting Indicator URC, it can have
two formats, as show in Additional info.
Parameter:
Name
Type
Default
Description
<enable>
integer
1
enables/disables the presentation of the #MWI: URC
Values:
0
:
disables the presentation of the #MWI: URC
1
:
enables the presentation of the #MWI: URC, see Additional info.
Additional info:
If AT#MWI=1 has been entered, the #MWI: URC is displayed each time
• a new message waiting indicator is received from the network, the URC format is:
#MWI: <status>,<indicator>[,<count>]
• the module is powered on, the URC reports the status of the message waiting
indicators, as they are currently stored on SIM, the format is:
#MWI: <status>[,<indicator>[,<count>][<CR><LF>
#MWI: <status>,<indicator>[,<count>][...]]]
The parameters are described in the unsolicited fields section for each URC format.
Unsolicited fields:
Name
Type
Description
<status>
integer
indicates clear or set action when it is received from the network.
Values:
0
:
clear: has been deleted one of the messages related to the
indicator <indicator>.
1
:
set: there is a new waiting message related to the indicator
<indicator>
<status>
integer
indicates the status when it is read from SIM.
Values:
0
:
no waiting message indicator is currently set. In this case no
other information is reported.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English