Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 480 of 545 2020-04-15
3.17.12. AT#SSLSECDATA - Manage the Security Data
The command stores, reads, and deletes security data (Certificate, CA certificate, private key) in / from NVM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLSECDATA=<SSId>,<action>,<dataType>[,<size>[,<Password>,<md5WhenReading>]]
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier.
Value:
1
:
Until now only one SSL socket is available
<action>
integer
0
required action
Values:
0
:
delete data from NVM
1
:
store data in NVM
2
:
read data from NVM
<dataType>
integer
0
security data type
Values:
0
:
certificate
1
:
CA certificate
2
:
RSA Private key. Private keys with password are not
supported
<size>
integer
N/A
size of security data to be stored. The parameter
is mandatory if write action is issued, can be
omitted for delete or read actions.
Value:
1÷4095
:
size
<md5WhenReading>
string
0
handling of RSA Private key reading when
<action> is 2.
Values:
0
:
RSA Private key is displayed in clear
1
:
only RSA Private key MD5 is displayed
Additional info:
Store security data in NVM
<action>=1 specifies the storing in NVM, <size> parameter is mandatory. After command
line is terminated with <CR>, the command returns the following four-character sequence
prompt:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English