Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 529 of 545 2020-04-15
3.23.4. GNSS Positioning Information
3.23.4.1. AT$GPSNMUN - Unsolicited NMEA Data Configuration
Unsolicited NMEA Data Configuration
[1] NMEA 0183 Standard
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT$GPSNMUN=<enable>[,<GGA>,<GLL>,<GSA>,<GSV>,<RMC>,<VTG>]
Set command allows to activate an unsolicited GNSS data stream built with NMEA sentences on
the standard serial port and defines which NMEA sentences will be available.
Refer to document [1] to have information on the NMEA sentences contents and formats.
Parameters:
Name
Type
Default
Description
<enable>
integer
0
Enables unsolicited GNSS data stream and selects one of the
available GNSS data stream format display. <enable>
parameter is also used to disable the GNSS data stream.
Here is the list of the <enable> values. See Additional info
section to have information on GNSS data stream formats.
Values:
0
:
disable GNSS data stream
1
:
enable the first GNSS data stream format
2
:
enable the second GNSS data stream format
3
:
enable the first GNSS data stream format, and reserve the AT interface
port only for the GNSS data stream
<GGA>
integer
0
enables/disables the presence of the Global Positioning
System Fix Data NMEA sentence (GGA) in the GNSS data
stream.
Values:
0
:
disable
1
:
enable
<GLL>
integer
0
enable/disable the presence of the Geographic Position -
Latitude/Longitude NMEA sentence (GLL) in the GNSS data
stream.
Values:
0
:
disable
1
:
enable
<GSA>
integer
0
enable/disable the presence of the GNSS DOP and Active
Satellites NMEA sentence (GSA) in the GNSS data stream.
Values:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English