Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 102 of 545 2020-04-15
3.1.4.9. AT+IPR - UART DCE Interface Data Rate Speed
The command sets the speed of the USIF0 serial port, see document [1].
[1] Hardware User's Guide of the used module
[2] ITU-T Recommendation V25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+IPR=<rate>
The command sets the UART speed of the USIF0 port during command mode operations.
Parameter:
Name
Type
Default
Description
<rate>
integer
115200
speed of the serial USIF0 port expressed in bit per second.
Values:
300
:
bps
600
:
bps
1200
:
bps
2400
:
bps
4800
:
bps
9600
:
bps
19200
:
bps
38400
:
bps
57600
:
bps
115200
:
bps
230400
:
bps
460800
:
bps
921600
:
bps
AT+IPR?
Read command returns the current value of <rate> parameter.
AT+IPR=?
Test command returns the list of <rate> values in the format:
+IPR: (list of <rate> values)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English