Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 364 of 545 2020-04-15
3.13.5. AT#SCFG - Socket Configuration
The command sets the configuration for the socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SCFG=<connId>,<cid>,<pktSz>,<maxTo>,<connTo>,<txTo>
Set command sets the socket configuration parameters.
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier.
Value:
1÷6
:
Socket connection identifier value
<cid>
integer
-
PDP context identifier. To know the range see +CGDCONT
command.
<pktSz>
integer
300
Packet size in bytes to be used by the TCP/UDP/IP stack for
data sending.
Values:
0
:
select automatically default value
1÷1500
:
packet size in bytes
<maxTo>
integer
90
Exchange timeout in seconds (or socket inactivity timeout); if
there's no data exchange within this timeout period the
connection is closed.
Values:
0
:
no timeout
1÷65535
:
timeout
<connTo>
integer
600
Connection timeout in tenths of seconds.
If we cannot establish a connection to the remote within this
timeout period, an error is raised.
Values:
0
:
no timeout
10÷1200
:
timeout value in hundreds of milliseconds
<txTo>
integer
50
data sending timeout; data are sent even if they are less than
max packet size, after this period. Used for online data mode
only.
Values:
0
:
no timeout
1÷255
:
timeout in tenths of seconds
256
:
timeout value of 10 ms
257
:
timeout value of 20 ms

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English