Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 68 of 545 2020-04-15
3.1.2.37. AT+CMUX - Multiplexing Mode
This command is used to enable/disable the multiplexing protocol control channel.
3GPP TS 27.007
3GPP TS 27.010
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CMUX=<mode>[,<subset>[,<port_speed>[,<N1>[,<T1>[,<N2>[,<T2>[,<T3>[,<k>]]]]]]]]
Set command is used to enable/disable the multiplexing protocol control channel.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
basic option is currently the only supported mode.
Value:
0
:
basic option mode.
<subset>
integer
0
the way in which the multiplexer control channel is set up
Values:
0
:
UIH frame
1
:
UI frames used only
2
:
I frames used only
<port_speed>
integer
N/A
transmission rate. The default value is implementation
specific.
Values:
1
:
9600 bps
2
:
19200 bps
3
:
38400 bps
4
:
57600 bps
5
:
115200 bps
6
:
230400 bps
<N1>
integer
31
maximum frame size.
Value:
1÷32768
:
expressed in bytes
<T1>
integer
10
acknowledgement timer in units of ten milliseconds
Value:
1÷255
:
in units of ten milliseconds
<N2>
integer
3
maximum number of re-transmissions

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English