Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 106 of 545 2020-04-15
3.1.4.12. AT#SKIPESC - Skip Escape Sequence
This command enables/disables skipping the escape sequence.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#SKIPESC=[<mode>]
Set command enables/disables skipping the escape sequence (+++) while transmitting during a
data connection.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable skipping the escape sequence (+++)
Values:
0
:
does not skip the escape sequence; its transmission is enabled.
1
:
skips the escape sequence; its transmission is not enabled.
In FTP connection the escape sequence is not transmitted, regardless of the command
setting.
AT#SKIPESC?
Read command returns the current value of the parameter <mode> in the format:
#SKIPESC: <mode>
AT#SKIPESC=?
Test command returns the supported values of parameter <mode>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English