Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 224 of 545 2020-04-15
3.5.10. AT+CNMI - New Message Indications to Terminal Equipment
This command sets the parameters for receiving SMS messages.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CNMI=[<mode>[,<mt>[,<bm>[,<ds>[,<bfr>]]]]]
Set command selects the behavior of the device on how the receiving of new messages from the
network is indicated to the DTE.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
unsolicited result codes buffering
option.
Values:
0
:
Buffer unsolicited result codes in the TA. If TA result code buffer is full,
indications can be buffered in some other place or the oldest indications
may be discarded and replaced with the new received indications.
1
:
Discard indication and reject new received message unsolicited result
codes when TA-TE link is reserved, otherwise forward them directly to the
TE.
2
:
Buffer unsolicited result codes in the TA in case the DTE is busy and flush
them to the TE after reservation. Otherwise forward them directly to the TE.
3
:
if <mt> is set to 1, it enables the hardware ring line for 1 sec.
<mt>
integer
0
result code indication reporting for
SMS-DELIVER.
Values:
0
:
No SMS-DELIVER indications are routed to the TE and message is stored.
1
:
If SMS-DELIVER is stored into ME/TA, indication of the memory location is
routed to the TE using the URC described in Additional info section.
2
:
SMS-DELIVERs (except class 2 messages and messages in the message
waiting indication group) are routed directly to the TE using the URC
described in the Additional info section.
3
:
Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result
codes defined in <mt>=2. Messages of other data coding schemes result in
indication as defined in <mt>=1.
<bm>
integer
0
broadcast reporting option
Values:
0
:
Cell Broadcast Messages are not sent to the DTE
2
:
New Cell Broadcast Messages are sent to the DTE with the URC described
in Additional info section.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English