Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 55 of 545 2020-04-15
3.1.2.27. AT+CMER - Mobile Equipment Event Reporting
This command configures sending of unsolicited result codes from TA to TE.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CMER=[<mode>[,<keyp>[,<disp>[,<ind>[,<bfr>]]]]]
Set command enables/disables sending of unsolicited result codes from TA to TE in the case of
indicator state changes.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
controls the processing of
unsolicited result codes
Values:
0
:
buffer +CIEV Unsolicited Result Codes
1
:
discard +CIEV Unsolicited Result Codes when TA-TE link is reserved (e.g.
on-line data mode); otherwise forward them directly to the TE
2
:
buffer +CIEV Unsolicited Result Codes in the TA when TA-TE link is
reserved (e.g. on-line data mode) and flush them to the TE after
reservation; otherwise forward them directly to the TE
3
:
forward +CIEV Unsolicited Result Codes directly to the TE; when TA is in
on-line data mode each +CIEV URC is stored in a buffer; once the ME
goes into command mode (after +++ was entered), all URCs stored in the
buffer will be output
<keyp>
integer
0
keypad event reporting
Value:
0
:
No keypad event reporting
<disp>
integer
0
display event reporting
Value:
0
:
no display event reporting
<ind>
integer
0
indicator event reporting
Values:
0
:
no indicator event reporting
2
:
indicator event reporting
<bfr>
integer
0
TA buffer clearing
Values:
0
:
TA buffer of unsolicited result codes is cleared when <mode> 1..3 is
entered

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English