Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 122 of 545 2020-04-15
3.2.7. AT+CPOL - Preferred Operator List
The command is used to edit or update the UICC preferred list of networks. The list is read in the UICC file
selected by the command +CPLS.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CPOL=[<index>] [,<format>[,<oper>[,<GSM_AcT>,<GSM_Compact_AcT>,
<UTRAN_AcT>,<E_UTRAN_AcTn>]]]
Execution command writes an entry in the UICC list of preferred operators.
Parameters:
Name
Type
Default
Description
<index>
integer
N/A
the order number of operator in the UICC
preferred operator list.
Value:
1÷n
:
order number in the list
<format>
integer
2
format for <oper> parameter.
Value:
2
:
numeric. Only 2 is allowed up to now
<oper>
string
-
Operator Identifier.
<GSM_AcT>
integer
N/A
GSM access technology.
Values:
0
:
access technology not selected
1
:
access technology selected
<GSM_Compact_AcT>
integer
N/A
GSM compact access technology. Currently the
parameter is not supported but set value is
accepted.
Values:
0
:
access technology not selected
1
:
access technology selected
<UTRAN_AcT>
integer
N/A
UTRAN access technology. Currently the
parameter is not supported but set value is
accepted.
Values:
0
:
access technology not selected
1
:
access technology selected
<E_UTRAN_AcTn>
integer
N/A
E-UTRAN access technology

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English