Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 139 of 545 2020-04-15
3.2.18. AT#CEERNETEXT - Extended Error Report for Network Reject
Cause
This command is both a set and an execution command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CEERNETEXT[=[<func>]]
Set command enables/disables the URC presentation or delates the last network information. The
execution command (AT#CEERNETEXT<CR><LF>) gets the last reject error information from the
network and returns the following message:
#CEERNETEXT: <code>,<AcT>,<MCC>,<MNC>
If no error information is present, the execution command returns OK
When URC is enabled, it will occur every time a mobility management (MM/GMM/EMM) or session
management (SM/ESM) procedure is not accepted by the network.
The URC message is equal to the message returned by the execution command.
Parameter:
Name
Type
Default
Description
<func>
integer
0
enable/disable the URC or delete the last network info
Values:
0
:
disable the #CEERNETEXT URC
1
:
enable the #CEERNETEXT URC
2
:
delete last info of <code>, <AcT>, <MCC> and <MNC>
Unsolicited fields:
Name
Type
Description
<code>
integer
last numeric Network Reject Cause from network, see <code> in
#CEERNET
<AcT>
integer
access technology of the registered network
Values:
0
:
GSM
8
:
CAT-M
9
:
NB-IoT
<MCC>
string
Mobile Country Code of the used network when last numeric code was
received
<MNC>
string
Mobile Network Code of the used network when last numeric code was
received
AT#CEERNETEXT?
The read command returns the current value of parameter <func> in the format:
#CEERNETEXT: <func>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English