Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 171 of 545 2020-04-15
SIM
3.3.1. AT+CPIN - Enter the PIN
The command sends to the device a password which is necessary before it can be operated.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT+CPIN=<pin>[,<newpin>]
Set command sends to the device a password which is necessary before it can be operated (SIM
PIN, SIM PUK, PH-SIM PIN, etc.).
If the PIN required is SIM PUK or SIM PUK2, the <newpin> is required. This <newpin>, will
replace the old pin in the SIM.
The command may be used to change the SIM PIN by sending it with both parameters <pin> and
<newpin>.
Parameters:
Name
Type
Default
Description
<pin>
string
-
PIN required or old PIN if the command is used to change the
SIM PIN
<newpin>
string
-
new PIN that will replace old pin
AT+CPIN?
Read command reports the PIN/PUK/PUK2 request status of the device in the form:
+CPIN: <code>
Additional info:
Parameters:
Name
Type
Default
Description
<code>
string
N/A
PIN/PUK/PUK2 request status
code
Values:
READY
:
ME is not pending for any password
SIM PIN
:
ME is waiting SIM PIN to be given
SIM PUK
:
ME is waiting SIM PUK to be given
PH-SIM PIN
:
ME is waiting phone-to-SIM card password to be
given

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English