ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 172 of 545 2020-04-15
ME is waiting phone-to-very first SIM card
password to be given
ME is waiting phone-to-very first SIM card
unblocking password to be given
ME is waiting SIM PIN2 to be given; this <code> is
returned only when the last executed command
resulted in PIN2 authentication failure (i.e. +CME
ERROR: 17)
ME is waiting SIM PUK2 to be given; this <code>
is returned only when the last executed command
resulted in PUK2 authentication failure (i.e. +CME
ERROR: 18)
ME is waiting network personalization password to
be given
ME is waiting network personalization unblocking
password to be given
ME is waiting network subset personalization
password to be given
ME is waiting network subset personalization
unblocking password to be given
ME is waiting service provider personalization
password to be given
ME is waiting service provider personalization
unblocking password to be given
ME is waiting corporate personalization password
to be given
ME is waiting corporate personalization
unblocking password to be given
Pin pending status at startup depends on PIN facility setting; to change or query the
default power up setting use the command AT+CLCK.
AT+CPIN=?
Test command returns OK result code.
AT+CMEE=1
OK
AT+CPIN?
+CME ERROR: 10
error: you have to insert the SIM
AT+CPIN?
+CPIN: READY
OK
you inserted the SIM and module is not waiting for PIN