Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 141 of 545 2020-04-15
3.2.19. AT#CIPHIND - Ciphering Indication
This command enables/disables unsolicited result code for cipher indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#CIPHIND=[<mode>]
Set command enables/disables unsolicited result code for cipher indication. The ciphering indicator
feature allows to detect that ciphering is not switched on and to indicate this to the user. The
ciphering indicator feature may be disabled by the home network operator setting data in the
SIM/USIM. If this feature is not disabled by the SIM/USIM, then whenever a connection is in place,
which is unenciphered, or changes from ciphered to unenciphered or vice versa, an unsolicited
indication shall be given to the user. The format is:
#CIPHIND: <mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable #CIPHIND: unsolicited result code
Values:
0
:
disable
1
:
enable
AT#CIPHIND?
Read command reports the <mode>,<cipher> and <SIM/USIM flag>:
#CIPHIND: <mode>,<cipher>,<SIM/USIM flag>
Additional info:
Here is the list of the parameters meaning returned by the read command.
Name
Type
Default
Description
<cipher>
integer
0
shows cipher status
Values:
0
:
cipher off
1
:
cipher on
2
:
unknown (missing network information)
<SIM/USIM flag>
integer
0
SIM/USIM cipher status indication
Values:
0
:
disabled
1
:
enabled

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English