Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 80 of 545 2020-04-15
3.1.2.47. AT#IMSPDPSET - IMS PDP APN Number Set
This command sets IMS Pdp APN Name. This name should be one of the APN names set in +CGDCONT
command and appropriated context will be opened for IMS.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#IMSPDPSET=<pdpApnName>
Parameter:
Name
Type
Default
Description
<pdpApnName>
string
-
from 1 to 32 symbols ANSI fixed string. It can be used
with or without quotes
AT#IMSPDPSET?
Read command reports the current setting of string parameter <pdpApnName>, in the format:
#IMSPDPSET: <pdpApnName>
If the file containing the setting is not present in EFS, read command returns an error:
AT#IMSPDPSET?
+CME ERROR: Unable to read the nv file
The file must be created by the set command.
AT#IMSPDPSET=?
Test command returns the maximum length for string parameter <pdpApnName>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English