Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 474 of 545 2020-04-15
3.17.9. AT#SSLS - Report the Status of a SSL Socket
This command reports the status of secure sockets.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLS=<SSId>
The command reports the status of secure sockets. The response message of the command can
have the following formats:
if secure socket is connected, the format is:
#SSLS: <SSId>,<ConnectionStatus>,<CipherSuite>
otherwise:
#SSLS: <SSId>,<ConnectionStatus>
The response messages parameters are described in the Additional info section.
Parameter:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier.
Value:
1
:
only one SSL socket is supported
Additional info:
List of the meaning of the response message parameters.
Name
Type
Default
Description
<CipherSuite>
integer
0
identify the cipher suite. The
<CipherSuite> parameter is expressed in
decimal and hex format to identify different
cipher suites.
The cipher suites identified by
<CipherSuite> parameters expressed in
decimal format are listed in the Value
section right below.
The cipher suites identified by RCF values
expressed in hex format are listed in the
#SSLSECCFG command.
Values:
0
:
Chiper Suite is chosen by remote Server
1
:
TLS_RSA_WITH_RC4_128_MD5, not available
because obsolete

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English