Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 475 of 545 2020-04-15
2
:
TLS_RSA_WITH_RC4_128_SHA, not available
because obsolete
3
:
TLS_RSA_WITH_AES_256_CBC_SHA, not
available because obsolete
4
:
TLS_RSA_WITH_AES_128_CBC_SHA, not
available because obsolete
5
:
TLS_RSA_WITH_AES_256_CBC_SHA
6
:
TLS_RSA_WITH_3DES_EDE_CBC_SHA, not
available because obsolete
7
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
8
:
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA,
not available because obsolete
9
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
10
:
TLS_RSA_WITH_AES_128_CBC_SHA256
11
:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
12
:
TLS_RSA_WITH_AES_256_CBC_SHA256
13
:
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
<ConnectionStatus>
integer
N/A
Connection Status identifier
Values:
0
:
socket disabled
1
:
connection closed
2
:
connection open
This command can be issued even if the <SSId> is not enabled.
For <CipherSuite> values expressed in hex format, refer to #SSLSECCFG command
AT#SSLS=?
Test command returns the ranges of the parameters values in format:
#SSLS: (1)
•
AT#SSLS=1
#SSLS: 1,1
OK
•
AT#SSLS=1
#SSLS: 1,2,0
OK

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English