Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 236 of 545 2020-04-15
3.5.13. AT+CMGR - Read Message
This command is used to read a message.
3GPP TS 27.005
3GPP TS 23.040
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CMGR=<index>
Execution command reports the message with location value <index> from <memr> message
storage (<memr> is the message storage for read and delete SMs as last settings of command
+CPMS).
Parameter:
Name
Type
Default
Description
<index>
integer
-
message index. The command output depends on the last
settings of command +CMGF (message format to be used).
There are two modes:
• PDU mode
• Text mode
See the following Additional info sections.
Additional info:
In case of PDU mode, if there is a message in location <index>, the output has the
following format:
+CMGR: <stat>,<alpha>,<length><CR><LF><pdu>
Name
Type
Default
Description
<stat>
integer
N/A
status of the message
Values:
0
:
new message
1
:
read message
2
:
stored message not yet sent
3
:
stored message already sent
<alpha>
string
-
string type alphanumeric representation of <da> or
<oa>, corresponding to an entry found in the
phonebook; used character set is the one selected
with command +CSCS
<length>
integer
-
PDU length in bytes

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English