ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 264 of 545 2020-04-15
3.6.4. AT+CPBW - Write Phonebook Entry
This command writes phonebook entry in the current phonebook memory.
AT+CPBW=[<index>][,<number>[,<type>[,<text>[,<group>[,<adnumber>[,<adtype>
[,<secondtext>[,<email>[,<hidden>]]]]]]]]]
Execution command writes phonebook entry in location number <index> in the current phonebook
memory storage selected with +CPBS.
Parameters:
value in the range of location numbers of the currently
selected phonebook memory storage (see +CPBS)
phone number in the format <type>
national numbering scheme
international numbering scheme (contains the character "+")
text associated to the number; used character set should
be the one selected with command +CSCS
string type field of maximum length <glength> indicating a
group the entry may belong to; character set as specified
by command Select TE Character Set +CSCS
additional number; string type phone number of format
<adtype>
string type field of maximum length <slength> indicating a
second text field associated with the number; character
set as specified by command Select TE Character Set
+CSCS
field of maximum length <elength> indicating an email
address; character set as specified by command Select
TE Character Set +CSCS
indicates if the entry is hidden or not
phonebook entry not hidden
If record number <index> already exists, it will be overwritten.