Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 182 of 545 2020-04-15
3.3.9. AT#QSS - Query SIM Status
Query SIM Status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#QSS=[<mode>]
Enables/disables the Query SIM Status unsolicited indication in the ME. The format of the
unsolicited indication is the following:
#QSS: <status>
The parameter is described in the Unsolicited field section.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Type of notification
Values:
0
:
disabled. It is only possible to query the current SIM status through read
command AT#QSS?
1
:
enabled. The ME informs at every SIM status change through the basic
unsolicited indication where <status> range is 0...1
2
:
enabled. The ME informs at every SIM status change through the basic
unsolicited indication where <status> range is 0...3
Unsolicited field:
Name
Type
Description
<status>
integer
current SIM status
Values:
0
:
SIM not inserted
1
:
SIM inserted
2
:
SIM inserted, and PIN unlocked
3
:
SIM inserted and READY (SMS and Phonebook access are
possible)
AT#QSS?
Read command reports whether the unsolicited indication #QSS is currently enabled or not, along
with the SIM status, in the format:
#QSS: <mode>,<status>
The parameters are described in the previous sections.
AT#QSS=?

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English