Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 27 of 545 2020-04-15
3.1.1.3. AT#/ - Repeat Last Command
The command immediately executes the previously issued command or commands.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#/
If AT#/ is issued, the device immediately executes once again the body of the preceding
command line. No editing is possible, and no termination character is necessary. A command line
may be repeated multiple times through this mechanism, if desired.
If AT#/ is issued before any command line has been executed, the preceding command line is
assumed to have been empty (that results in an OK result code).
This command is the same as A/ but does not need a fixed +IPR.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English