Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 415 of 545 2020-04-15
Intermediate response parameter.
Name
Type
Default
Description
<time>
string
-
current time as quoted string in the format:
"yy/MM/dd,hh:mm:ss±zz"
In case of error, the command returns the following error message:
+CME ERROR: <err>
Parameter <err> can be either numeric or verbose (see +CMEE). The available values are
reported in the table:
Numeri
Format
Verbose Format
30001
sntp - not enough resources
30002
sntp - net timeout
30003
sntp - socket error
30005
sntp - host name resolve error
30006
sntp - invalid parameter
30008
sntp - send timeout
30009
sntp - send error
30011
sntp - response timeout
30020
sntp - generic error
30030
sntp - server authentication fail
30031
sntp - server keys file missing
30200
sntp - cannot set time
The Time Zone is applied directly in the Date and Time received by the NTP Server, that
is, by definition, GMT+0.
#SGACT must be called to activate the PDP context before calling #NTP command.
AT#NTP=?
Test command returns the maximum length for <NTPAddr> string, and supported range of values
of parameters: <NTPPort>, <updModClock>, <timeout> and <timeZone>.
Execution command with NTP server.
AT#NTP="0.it.pool.ntp.org",123,1,2,4
#NTP: 19/03/13, 13:16:33+04
OK
AT+CCLK?
+CCLK: "19/03/13, 13:16:34+04"
OK

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English