Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 460 of 545 2020-04-15
Values:
0
:
do not ignore
1
:
ignore
<SSLSRingMode>
integer
0
SSLRING unsolicited mode
Values:
0
:
disable
1
:
enable decoded data format, see Additional info section
2
:
enable chunk of data format, see Additional info section
<unused3>
mixed
-
unused
<equalizeTX>
integer
0
enable/disable equalized data transmission
Values:
0
:
disable equalized data transmission
1
:
enable equalized data transmission, i.e.: after successful
data write for sending on SSL connection, next check for
available <pktSz> data is triggered after <txTo>
Additional info:
When <SSLSRingMode>= 1 a new unsolicited is sent whenever the amount of data ready to
be read changes, the unsolicited format is:
SSLSRING: <SSId>,<recData>
<recData> is described in the Unsolicited fields section.
When <SSLSRingMode>= 2 the unsolicited format is:
SSLSRING: <SSId>,<dataLen>,<data>
<dataLen> and <data> are described in the Unsolicited fields section.
Unsolicited fields:
Name
Type
Description
<recData>
integer
amount of data received and decoded by the SSL socket
<dataLen>
integer
length of the current chunk of data in bytes
<data>
hex
received data in ASCII format
If secure socket is not enabled using #SSLEN only test requests can be made.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English