Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 154 of 545 2020-04-15
If <mode>=2 and there is a change in the eDRX parameters provided by the network, the
unsolicited result code reports:
+CEDRXS: <AcTtype>[,<Req_eDRX>[,<NW_prove_DRX>[,<PagTimeWindow>]]]
Name
Type
Default
Description
<NW_prove_DRX>
string
-
half a byte in a 4-bit format. The eDRX
value refers to bit 4 to 1 of octet 3 of the
Extended DRX parameters information
element (see subclause 10.5.5.32 of 3GPP
TS 24.008). For the coding and the value
range, see Extended DRX parameters
information element in 3GPP TS 24.008
Table 10.5.5.32/3GPP TS 24.008.
<PagTimeWindow>
string
-
half a byte in a 4-bit format. The paging
time window refers to bit 8 to 5 of octet 3 of
the Extended DRX parameters information
element (see subclause 10.5.5.32 of 3GPP
TS 24.008). For the coding and the value
range, see the Extended DRX parameters
information element in 3GPP TS 24.008
Table 10.5.5.32/3GPP TS 24.008.
AT+CEDRXS?
Read command returns the current settings for each defined value of <AcTtype>, in format:
+CEDRXS: <AcTtype>,<Req_eDRX>[<CR><LF>
+CEDRXS: <AcTtype>,<Req_eDRX>[...]]
AT+CEDRXS=?
Test command returns the supported <mode>s and the value ranges for the access technology
and the requested eDRX value as compound values.
AT+CEDRXS?
+CEDRXS: 4,"0000"
+CEDRXS: 5,"0000"
OK

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English