Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 169 of 545 2020-04-15
<qual>
integer
-
quality of reception: 0..7
<lac>
string
-
localization area code
<id>
integer
-
cell identifier
<arfcn>
integer
-
assigned radio channel
<dBm>
integer
-
received signal strength in dBm.
<timadv>
integer
-
timing advance
<rscp>
integer
-
Received Signal Code Power in dBm.
<drx>
string
-
Discontinuous reception cycle length
<physicalCellId>
integer
-
physical cell identifier
<rsrp>
integer
-
Reference Signal Received Power
<rsrq>
integer
-
Reference Signal Received Quality
<tac>
integer
-
Tracking Area Code
<earfcn>
integer
-
E-UTRA Assigned Radio Channel
<QRxLevMin>
integer
-
minimum required RX level in the cell
TA: <timadv> reported only for the serving cell.
When AT#MONI=7 is the last setting entered, the execution command AT#MONI<CR>
reports the information previously listed for each of the cells in the neighbor of the serving
cell. The information is formatting in a sequence of <CR><LF>-terminated strings.
The timing advance value is meaningful only during calls or GPRS transfers active.
AT#MONI=?
Test command reports the maximum number of cells, in a neighbor of the serving cell excluding it,
from which we can extract GSM/LTE related information, along with the ordinal number of the
current selected cell, in the format:
#MONI: (<MaxCellNo>,<CellSet>)
Additional info:
Parameters meaning.
Name
Type
Default
Description
<MaxCellNo>
integer
-
maximum number of cells in a neighbor of the
serving cell and excluding it from which we can
extract GSM/LTE related information. This value
is always 6.
<CellSet>
integer
-
last setting done with command #MONI.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English